water cylinder

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

water cylinder

Recent contents Top users
  1. S

    Possible Leaking Gravity Fed Hot Water Cylinder Valve

    Hi all. This ‘valve’ is at the bottom of our domestic hot water cylinder. Anyone have any idea what it is please? It must’ve been there for many years and seems to be leaking.
    • s11lko
    • Thread
    • cylinder gravity hot water leaking valve water water cylinder
    • Replies: 4
    • Forum: UK Plumbers Forums
  2. D

    OSO unvented hot water cylinder - Wi-Fi / programmable control

    Hi all, I have an OSO Direct 210 hit water cylinder installed in my home, with 2 switches (on/off; and boost). The boiler is for hot water only (rads are electric). In the 5 years that I’ve lived at this property, I’ve never once turned the boiler off; however, with soaring energy prices, I’m...
  3. P

    Change shower mixer. Invented hot water cylinder

    I need to change my shower mixer and I have a unvented hot water cylinder. Is it sufficient to turn off the mains? Do I need to drain the cylinder? Thanks
  4. B

    Do I need a washer for blanking plug in a copper hot water cylinder?

    Hi all I'm blanking a couple of openings in a hot water cylinder. The Screwfix Flomasta 1" BSP plugs fit perfectly but no washer supplied or listed. Given that the element has a washer and everything else is a compression fitting I'm concerned these should have one. The alternative is PTFE...
  5. chris020

    Hot water cylinder circulator

    After some advice, i have recently had solar panels fitted and have an Eddi which uses the energy we generate to heat the cylinder using the immersion heater. Just wondering if there are any devices that can circulate the hot water in the cylinder so the immersion heater heats all the water...
  6. J

    Is Pressure checked at same time of hot water cylinder repair

    Hello, hoping someone can advise me. My boiler stopped working - no hot water or central heating. Called out a company who came and assessed the problem as being that the hot water element in the immersion tank needed replacing. (I don't know exactly what it is called as the company has still...
    • Johnno1966
    • Thread
    • cylinder hot water pressure water water cylinder
    • Replies: 1
    • Forum: Air Sourced Heat Pumps
  7. J

    Direct Hot Water Hot Water Cylinder Repair

    Hello, hoping someone can advise me. My boiler stopped working - no hot water or central heating. Called out a company who came and assessed the problem as being that the hot water element in the immersion tank needed replacing. (I don't know exactly what it is called as the company has still...
    • Johno1966
    • Thread
    • cylinder hot water water water cylinder
    • Replies: 2
    • Forum: Air Sourced Heat Pumps
  8. L

    air lock in hot water cylinder coil?

    Hi all. Ive had to replace the pump isolator valves as they were leaking. All done and working but struggling to get air out. Rads are all good but when the boiler starts and stops there is odd sounds but mainly coming from inside the HW tank, sounds like water falling so im guessing air in...
    • leertodd
    • Thread
    • cylinder hot water water water cylinder
    • Replies: 15
    • Forum: Boilers
  9. Z

    Hot water cylinder leaking around joint with hot water inlet

    I'm trying to remove the zone valve ion vented tank and the tank started leaking around the joint. I was hoping to just run the tank with immersion till I can get an unvented. Any tips to stop leaks or do you think I need to buy temporary tank. Any help appreciated as I'm without hot water now.
    • zacwithleak
    • Thread
    • cylinder hot water leaking water water cylinder
    • Replies: 2
    • Forum: UK Plumbers Forums
  10. cotswoldmark

    Leaking Water cylinder, behind anti corrosion system

    Hi - I have a plumber booked in to look at this, but I would also like to understand myself what is causing the issue we have. We have a slow drip of water coming from behind the anticorrosion unit on our Ariston unvented water cylinder. The pink "nozzle" behind the Protech unit appears to be...
  11. H

    Hot water cylinder only heating top half of tank

    Hiya, we had a new pressurised hot water cylinder fitted a few weeks ago even though its double the size of our last one we are finding we aren't getting any more hot water. So once the tank is full and the immersion has turned off and i touch the tank only the top half feels warm and the bottom...
  12. M

    Leaking drain valve on Hot water cylinder. Advise please

    Hi All, I have a leaking drain valve off the CW inlet on a Range Cylinder. Am I right in thinking I have to empty the Cylinder below the CW inlet to change the valve? To isolate cold water to the tank to prevent refill, should I just lock off the 1 stop CW inlet or all 3 red stops? Turn mains...
    • matt68
    • Thread
    • cylinder drain hot water leaking valve water water cylinder
    • Replies: 7
    • Forum: UK Plumbers Forums
  13. alex567

    heat pump and water cylinder installed away from the house, pros/cons

    I'm planning to get an air source heat pump (ASHP) installed and I'm considering my options about the location of the water cylinder as I live in a small house and space is a premium. I was thinking about building a small insulated shed about 20 to 25 metres away from the house to put the...
    • alex567
    • Thread
    • cylinder heat house pump water water cylinder
    • Replies: 10
    • Forum: Renewables
  14. Bookalon

    hot water cylinder control valve

    Hi, I have an oil burner which is controlled via Tado to heat my home. My hot water cylinder is heated with water from the burner and also has a dumb immersion. I don’t use the immersion at all And would like to replace it. The burner heats the water in my hot water cylinder with a TRV valve...
  15. D

    install combi boiler and pressurised hot water cylinder

    Hello, looking for a heating engineer to recommend / install a pressurised cylinder and combi boiler system. There is ufh for a living space and two bathrooms, and radiators for the rest of the house. It's a 3 bed 2 bathroom property with solar panels on the roof, located in ringwood bh24. Any...
    • David Lowth
    • Thread
    • boiler combi combi boiler cylinder hot water install water water cylinder
    • Replies: 0
    • Forum: Boilers
  16. Spinball

    Do I need to change my water cylinder?

    Hello folks, I am hoping to get some advice, please, on whether or not to change my hot water cylinder. I recently moved house and the heating control is an old wall thermostat and rotary dial. I want to investigate converting it to a smart system (that I can control with an app), maybe with...
  17. C

    Horizontal hot water cylinder install. Does this look correct?

    Anyone out there able to help? Is this correct or are there things wrong and if so what?
  18. S

    Help diagnosing bubbling originating in hot water cylinder

    Hi there, I recently replaced a dead central heating pump in my home, so drained down the system completely, fitted new pump and filled up. What I'm experiencing now is a periodic bubbling noise, it starts in the hot water cylinder on the 1st floor and makes its way to the boiler on the ground...
  19. G

    Replace leaking hot water cylinder or change to combi boiler?

    Hi, In my 2 bedroom flat I have a Worcester Greenstar 24i boiler and a 200 litre Zip AquaFlow hot water cylinder. The hot water cylinder has started to slowly leak from the bottom and I think it will need completely replaced - quote to replace is around £1000. Given that this is only a 2...
    • gmacdon76
    • Thread
    • boiler combi combi boiler cylinder hot water leaking replace water water cylinder
    • Replies: 2
    • Forum: Boilers
  20. M

    Continuous noise from indirect water cylinder

    I have moved into a house with a Joule Cyclone CY200L indirect cylinder in my loft. Recently it seems to continuously be making a noise, as if it's filling up or heating up, I'm not sure which. The thermostat on the side is set to 55, when I turn it below 50 there is a click and then the noise...
Back
Top