1 inch pipework | Gaining Plumbing Experience | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

1 inch pipework

Post thread
Post reply

Discuss 1 inch pipework in the Gaining Plumbing Experience area at Plumbers Forums

L

LilyAnna

Hi

We are restoring an old house and are putting in cast iron radiators. Does anyone know where I can get nice radiator valves for this size pipework? I've been searching the internet but cannot find anything suitable. Thanks for your help.....

LilyAnna
 
Sorry, the post had to be removed (you are not imagining things :)) as it was part of a few posts advertising the Rad valves by the same user and it so happened that it helped you on this occasion

Advertising is only allowed by Official Forum Sponsors so this was against forum rules

Hope you find your answer now though but I will have to close this thread
 

Similar plumbing topics

S
Capping off redundant pipework question.
Ok I think I see what your saying mate, So...
Replies
9
Views
737
sammy67
S
C
  • Question
DIY shower with exposed pipework
Update. Here’s the finished bathroom I’m...
Replies
9
Views
2K
christrickey1972
C
C
Radiator upgrade on 10mm pipework
Ok, so on paper looks like a feasible upgrade...
Replies
4
Views
2K
chazvr
C
M
  • Question
Insulating 50-gallon water header tank
I'm lucky enough to be able to 'aquire '...
Replies
1
Views
635
exedon2
exedon2
A
  • Question
Radiator Bleed Valve - 1/8-27: Thread Type
Ah ok. In the past on bleed valves I have not...
Replies
4
Views
826
AdamW85
A
Back
Top