2 Channel CH Programmer with WIFI

[suityou01]

I would like to ask for specific product recommendations (or examples of such) that:

a) Fit a standard back plate
b) Would work with an existing wired room stat (single heating zone)
c) Would provide 7 day, 2 Channel programming (CH and DHW)
d) Is not tied into any proprietary home automation such as Alexa
e) Can be operated from the front panel, or via smart phone app (android) and web interface via local broadband router LAN.

I note in the other thread that the recommendation is to install Hive onto the existing backplate, but I cannot find any 2CH Hive programmers that look like they would fit a standard backplate.

Further info that may be relevant. The boiler is a Combi and the existing controller is a Drayton (LP722)

 

[Ben-gee]

Is your combi being used to heat up a cylinder?
If not you don’t need a channel for DHW as the combi is an on demand system….

 

[snowhead]

Something like Drayton Wiser Thermostat kit 2 might do.
I've never fitted one, know nothing about it other that what I've just read a few minutes ago.

 

[king of pipes]

Look at Nest 3rd generation plenty of wiring videos on YouTube but I'd get a pro in to avoid teething problems. Kop

 

[Deleted member 120897]

What about something like this? Presume you’d set thermostat to max or join the wires.

 

[Murdoch]

Salus IT500 meets your needs, except the back plate

 

[suityou01]

Is your combi being used to heat up a cylinder?
If not you don’t need a channel for DHW as the combi is an on demand system….

No it is not. It is, as you say, on demand.

 

[Deleted member 120897]

No it is not. It is, as you say, on demand.

You don’t need a 2 channel then, single would be better and possibly cheaper.