2 rads dead cold | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 2 rads dead cold in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

manorpurl

Dear ll, I have 2 rads in my house that are not getting cold at all. They will get warm if i turn off the other rads in the house. They only get warm despite the flow pipe (lockshield valve i believe) is piping hot. I should expect same temp in the rad as the flow pipe. Both valves are fully open as well.
Also, these rads seem to be on the circuit of the pipe where the extension was done.
Any ideas folks?
 
That is what i thought, but when i bleed, the water which comes out is not black color. Do you think it is some heavy sludge sitting at the bottom.
 
Status
Not open for further replies.

Similar plumbing topics

You seem to have got it sorted, but for future...
Replies
7
Views
1K
With CH selected on, if you open a hot tap...
Replies
2
Views
602
  • Question
'Have tried all off bar A, B, and C, so not...
Replies
3
Views
873
  • Question
Will be a 15-60 then prob ups2 Green lights ?
Replies
8
Views
1K
Thanks :) . A happy new year to you!
Replies
23
Views
1K
Back
Top