21.5 mm overflow pipe

[dom brennan]

hi just a quick question we went to a job the other day and the condensate from the boiler 21.5mm had an offset on it i was just wondering if anyone has done this before and how would you do it.

 

[Roger Welton]

Heatgun and bend by hand

 

[buckley plumb]

in the 22mm bender works for me

 

[dom brennan]

we tried that today but it just snapped into two, do you need to heat it up first

 

[buckley plumb]

we tried that today but it just snapped into two, do you need to heat it up first

depends on the weather and the quality of the pipe.

 

[Koogatubac]

we tried that today but it just snapped into two, do you need to heat it up first

Ease it back and forth, back and forth, the pipe will mould itself to where you need it, you can't pull full 90* etc on it tho lol

 

[REDSAW]

did one for a saniflo the other week indoors, straight into the bender to 90 deg but it springs back to 45 so a heat gun whilst holding the bend worked for me and saved loads of joints