240v elec pipe freezing kit | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss 240v elec pipe freezing kit in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

acmgas

Gas Engineer
Messages
25
Hi all, Looking to buy a pipe freezing kit , would be grateful of any feed back on any machines and cost please. Thanks Mark
 
I have a freeze master, had it years, works superb, only problem is when it stops, last time , re gassed. Etc etc, postage ( they are heavy ) invoice and vat was about £250 ish however its only been back twice in over ten years
 
. Snatch most domestic stuff. Even snach bigger stuff but u get wet.
District heating or iron would be helpful.
 
just stops any stress imho, paid around £450 for my freezemaster on ebay, charge a "hire charge" on each use and it soon pays for itself
 
Got a freezemaster 280d. Do lots of stuff in a few care homes so heating/ hot water can't be off for any length of time. Wicked bit of kit
 
Got a freezemaster 280d. Do lots of stuff in a few care homes so heating/ hot water can't be off for any length of time. Wicked bit of kit

same one as me but mines rems branded for some reason, brillant little freezer and ok upto 35mm but the water cant be flowing
 
I've got a rofrost. Got it for free so can't complain. Bit hit and miss with heating pipes sometimes.
 
Thanks for all your replies guys,
Freeze master 280d looks like its coming out on top.
Keep putting it of buying one ,might have to take the plunge now.
Getting fed up with air locks.
Thanks mark
 
I also make a pretty good trade hiring it to my mates
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Your over thinking this do as I said the...
Replies
9
Views
1K
Atag let you go for the 600mm clearance away...
Replies
9
Views
861
D
  • Question
No problem, thank you for the advice. I admit...
Replies
11
Views
1K
  • Question
Any thoughts on this bottle gully arrangement?
Replies
6
Views
626
Back
Top