3/4 rubber washer Bath tap connector

[Matt0029]

When changing bath taps does anyone use the 3/4 flat washers you get with hep20 tap connectors instead of fibre washers? I use the 1/2 inch hep20 rubber washers on toilet service valves and no. 62s and have worked well.

 

[ShaunCorbs]

I do as I find it’s hard to get good quality fibre washers these days and they only require a nip up and you know bath taps are never the easiest to get at

 

[Matt0029]

I do as I find it’s hard to get good quality fibre washers these days and they only require a nip up and you know bath taps are never the easiest to get at

They look a good fit.

 

[Aquarius]

Ohhh, I thought you were on about using hep washers in the hep fitting - I was going to ask “why would you use anything else?” 😂😂😂😂

 

[Matt0029]

Ohhh, I thought you were on about using hep washers in the hep fitting - I was going to ask “why would you use anything else?” 😂😂😂😂

Have you used then on copper tap connectors before?

 

[Aquarius]

Have you used then on copper tap connectors before?

No I haven’t. They look a nice snug fit. Only Hep washers I’ve seen are the ones that come with the flexi’s, but they look bigger than yours.