S
Sharp Point
Right guys n gals,
Went to carry out a yearly gas safety check today at one of my long term landlords properties. Since a year ago he's been lucky to have a free boiler on the current ' whatever it's called' now scheme, the flue is perfect horizontal across the top of the units and goes to up and beyond. Yes its has been sort of adequately supported ( plasterboard fixings pulling out of wall).....
BUT
every clamp on each section is leaking condensate on top of boiler, if you look at pic 3 you can see the black staining on the upper cornice corner from moisture ingress. I stripped the entire flue and found 2x seals push out from hacksaw cut rough square edges on the inner flue.
WTF
What is wrong with people today!! and not lets get into the debate of ' contractors' on poor rates etc etc.
Ive spent some of my previous years contracting, banging in full heats and boiler upgrades in a day...ahem with a small team, but they were done excellently with aplomb. This boiler change was a combi swap, carried out by two blokes in a day!!! I use to do the same by myself in a day, but i would've had the minimum fall and chamfered and greased the flue prior to fitting.
Could i riddored the swines?
Went to carry out a yearly gas safety check today at one of my long term landlords properties. Since a year ago he's been lucky to have a free boiler on the current ' whatever it's called' now scheme, the flue is perfect horizontal across the top of the units and goes to up and beyond. Yes its has been sort of adequately supported ( plasterboard fixings pulling out of wall).....
BUT
every clamp on each section is leaking condensate on top of boiler, if you look at pic 3 you can see the black staining on the upper cornice corner from moisture ingress. I stripped the entire flue and found 2x seals push out from hacksaw cut rough square edges on the inner flue.
WTF
What is wrong with people today!! and not lets get into the debate of ' contractors' on poor rates etc etc.
Ive spent some of my previous years contracting, banging in full heats and boiler upgrades in a day...ahem with a small team, but they were done excellently with aplomb. This boiler change was a combi swap, carried out by two blokes in a day!!! I use to do the same by myself in a day, but i would've had the minimum fall and chamfered and greased the flue prior to fitting.
Could i riddored the swines?