3 port valve | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 3 port valve in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
R

rosie

Hi ,when my central heating goes off in the evening the 3 port valve does not close off and ther is a humming and a vibration from even hours after wards.
the only way to stop it is to turn off the electric and the valve closes. i turn the electic back on and no noise, no vibration.
Its a new boiler 18 months old, had plumbers to try and fix it fittting 2 new pumps and 2 new 3 port vavles.HELP
 
Hi ,when my central heating goes off in the evening the 3 port valve does not close off and ther is a humming and a vibration from even hours after wards.
the only way to stop it is to turn off the electric and the valve closes. i turn the electic back on and no noise, no vibration.
Its a new boiler 18 months old, had plumbers to try and fix it fittting 2 new pumps and 2 new 3 port vavles.HELP

3 port mid position valves always stop in the last mode they were in. eg if in hw then would stop there they only spring return when the power is turned off.
 
Status
Not open for further replies.

Similar plumbing topics

In the end decided to follow Chuck’s advice...
Replies
11
Views
878
I don't believe moving the manual lever over...
Replies
5
Views
555
  • Question
With two issues following someone working on...
Replies
3
Views
504
Replies
0
Views
509
https://www.NoLinkingToThis/p/drayton-27101sx-3-po...
Replies
1
Views
2K
Back
Top