3 port valve ? | Plumbing Jobs | The Job-board | Plumbers Forums

  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

3 port valve ?

Post thread

Discuss 3 port valve ? in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
M

Mugwuffin

Gas Engineer
Messages
23
Hi Guys, just got a call to look at a Remeha Avanta 18V tomorrow . Homeowners had no hot water or heating for couple days now, boiler is displaying an E4 fault code but the Danfoss HSA3 motor valve is "damp". Just looked up the MI and can't see how an E4 code would tally with a knackered 3 port ? could there be a short inside the valve upsetting the boiler ? Thanks in advance !!
 
This'll be two separate problems. Won't be able to help you out anymore on the gas side of things.
 
Well, the Mi says it could be a gas issue, I'm GSR but have only done installs not faults to date, how do i register as GS with the forum ? Cheers
 
You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.




Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. I'm looking for a Plumber or Gas Engineer




If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.




Thank you.




http://www.ukplumbersforums.co.uk/ce...ed-advice.html (notice gas safety related advice)
 
Whn1 said:
You need a gsr in to look at your boiler. We cannot and will not give advice on the installation or repair of boilers for your own safety.




Please go to Gas Safe Register | Ensure your gas engineer is registered. or post a thread in the 'I'm looking for a plumber / gas engineer' section of these forums remembering to include your location. I'm looking for a Plumber or Gas Engineer




If you are gsr please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.




Thank you.




http://www.ukplumbersforums.co.uk/ce...ed-advice.html (notice gas safety related advice)
Click to expand...

Thank you croppie :)
 
Status
Not open for further replies.

Similar plumbing topics

M
  • Question
3 port valve
No I wouldn't. The valve and motors are in...
Replies
12
Views
1K
Last Plumber
Last Plumber
D
Changing a 3 port actuator valve
https://www.NoLinkingToThis/p/drayton-27101sx-3-po...
Replies
1
Views
2K
ShaunCorbs
ShaunCorbs
B
  • Question
Three Port Valve bang when heating switches off.
3 port could be on its way out?
Replies
3
Views
2K
Deleted member 120897
D
fronty
How stiff should the 3 port valve be?
If the valve itself is stiff but you just...
Replies
15
Views
9K
steadyon
S
F
Strange Central Heating Motorised/Actuator Valve behaviour Manual Mode
aha that makes sense, maybe before it was half...
Replies
2
Views
1K
fromage
F
Back
Top