38mm antislip ring pvc compression fittings | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 38mm antislip ring pvc compression fittings in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
2
I am replacing the seals on washers on my sink waste trap. Can the 38mm anti slip ring/washer be bought alone as there is nothing wrong with the actual fittings. I can find the rubber seals and I can see 38mm trap washers at Toolstation. Are these right or can red/blue ones be bought?

And why are they red/blue? Do you get hot/cold wastes?

Thanks
 
Most traps can have the seals replaced plumbing and heating merchants stock replacements the colour of the plastic type ring is not relative different manufacturers use a mix of materials , cheers kop
 
Thank you for your reply. I figured to colour was unimportant, just thought as they are supplied coloured that coloured replacements would be easy to find. It seems not. As a DIYer I stick to ScrewFix and ToolStation.
 
Blue for 1 1/4 Red for 1 1/2 applies to MacAlpine fittings ...regards Turnpin:)
 
Status
Not open for further replies.

Similar plumbing topics

    • Useful
Did you manage to solve this issue? If so...
Replies
1
Views
519
Have you got a photo of the sink at the...
Replies
2
Views
626
Did you ever get to the bottom of this...
Replies
17
Views
2K
Would cap both off separately cut just below...
Replies
1
Views
462
If the coupling fits, then no need for what I...
Replies
10
Views
2K
Back
Top