50mm shower waste into horiz SVP. Picture option A, B or C... | Showers and Wetrooms Advice | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss 50mm shower waste into horiz SVP. Picture option A, B or C... in the Showers and Wetrooms Advice area at Plumbers Forums

M

moose_cheese

hello, I need help getting shower waste into horizontal svp. (outside of house)

The 50mm shower waste (red circle) exits the building above the horizontal svp pipe (blue). This 'red' shower waste has already traveled 2.3m at the correct fall before it exits the building.

Which option of pipe work (green) can i use to connect? A, B, or C?

H1 says '45 degree join', but I also cant go over the maximum fall... it's only 300mm ish.


(thought about putting this in the Marley 135deg boss branch SWS4135)

Thanks

MC
 

Attachments

  • pipe2.JPG
    pipe2.JPG
    25.4 KB · Views: 49
I would trust Chalked and his reply but if you want other replies then log in later when others are home.

I do trust his reply :) However with the 22mm:1m fall I have on Horiz SVP, I'm inclined to try a bit of an angle to give the shower waste some 'direction'.
I'm concerned the Building Inspector will then moan at this angle of fall for the short area.
 
Upvote 0
I do trust his reply :) However with the 22mm:1m fall I have on Horiz SVP, I'm inclined to try a bit of an angle to give the shower waste some 'direction'.
I'm concerned the Building Inspector will then moan at this angle of fall for the short area.

Either wait around a while or talk to the Building Inspector.
 
Upvote 0
Back
Top