A Plumbers Tool Box - HELP

[Chris4489]

Hi guys,

Has anyone got a general list of tools that are essential for a plumber?? I am due to receive my 'free tool kit' from NCS in January and was wondering what I would need to get to add to it.

Thanks
Chris

 

[mike-c]

Don't know what you get in the free kit but make sure you have a set of box spanners for fitting taps first and foremost or you will struggle every time you have to work with taps.

 

[hunterseye]

Think of the jobs your likely to do and then work out what tools you need from that as a starting point mate.

 

[Rodolphe]

Don't rush to buying everything at once. Get the tools you will need for the job you've booked. There are a lot of tools you will have to have in the long run, it's a lot of money to spend outright.

But a decent drill is a must.

 

[Chris4489]

Thank you Mike, I will be making sure if I don't get them included, I will be purchasing them. Thank you too hunterseye and Rodolphe, I know buying all at once can be very costly so I will be seeing what kind of jobs I will do doing first and Rodolphe, what sort of Drill do you recommend? As I know there are plenty of different versions (hammer/Angle/Etc...)

Chris

 

[Dannyparty92]

Decent SDS drill and a cordless. Can get a decent 18 volt ni-cd makita cordless from somewhere like B&Q for around 100.

 

[Rodolphe]

Definitely a ni-cd cordless with a spare battery. I got an 18v DeWalt I'm really happy with.

The SDS I know I'll have to buy one of these days but so far hasn't been needed. Luckily.

 

[Chris4489]

Decent SDS drill and a cordless. Can get a decent 18 volt ni-cd makita cordless from somewhere like B&Q for around 100.

Thanks Danny, much appreciated. Very much doubt they are going to give me a drill in the Box, so think I'll look into buying one, Ive seen that Screwfix/Plumbfix is doing good offers atm.

 

[PlumbBobBob]

there have been many posts on this subject i'll dig one up for you

 

[Chris4489]

there have been many posts on this subject i'll dig one up for you

Thanks Steveb, Sorry about that, i'm still getting used to this forum.

 

[PlumbBobBob]

not a problem have a look here
http://www.ukplumbersforums.co.uk/plumbing-tools/38608-what-else-do-i-need.html

 

[Phil]

Decent SDS drill and a cordless. Can get a decent 18 volt ni-cd makita cordless from somewhere like B&Q for around 100.

Don't bother with Ni-cads, they've been around since at least WW1 and have had their day. Li-ion is the way to go, never again will I be failed by a dead nicad when I most need it.

 

[Barry98]

not a problem have a look here
http://www.ukplumbersforums.co.uk/plumbing-tools/38608-what-else-do-i-need.html

love how radio and dust sheets were at the top . same as me on any job protect the floor get the tunes on

 

[Phil]

The tools supplied will get you past the first year I suppose, doubt there will be any decent stuff in there although there maybe some Footprint grips.

 

[Simon F]

as said, it will depend on what you will/might??? be doing.
will you be working self employed? then the likely hood is that if you haven't got it, you will want it.
if you have a work placement with someone, make sure you have a tspoon,
then no doubt they will let you use there kit to start with

 

[Nimit]

Get yourself 15 & 22mm pipe slices. When I did the course they did not provide those. They just provided an adjustable pipe cutter.

 

[Resolute]

Do u have a list of what's in the free tool kit?

 

[Killy Bing]

Other than what has already been said a Camera or have a decent one on your phone, when you go to a job take a photo and another as you leave. If something is damaged or not quite right take a photo too
can save your bacon !!! Also a dust sheet, buying a carpet every job gets expensive..

 

[tamz]

When i started out in this game i had a terrible set of tools but i managed. I had a few good bits and pieces that were given to me but otherwise, i couldn't afford good tools.
I would go to the market on a Sunday and buy a set of screwdrivers for a pound.....every week.
I couldn't even afford a new footrule if i broke the one i had.
Now i buy anything i want, when i want, but that is near 40 years later.
Buy the best you can afford and when you can afford it, buy the best. (btw, you will seldom find the best in screwfix or the like)

 

[Avatar]

If you are going to get a cordless combi drill do not bother unless you are going to spend £300 most likely - do not get any deal from B and Q as the battery will be pants . . . .

Your better bet is get an SDS and drill driver combi from Screwfix (£120) - it is amazing how much you can do with just these!

Make sure the SDS has roto stop, and the cordless drill will do for other jobs:

Something like this - 240V 2.3kg SDS Plus Drill & 14.4V Drill Driver Twin Pack | NoLinkingToThis

 

[Avatar]

The next best advice is don't spend top dollar on tools you are going to use infrequently!

Spanners and combi drills - yes!

Jigsaws and screwdrivers - no!

 

[erpkid]

No matter what you have there will always be something else. Keep an eye on the tools that you use most and upgrade them to the best quality you can when budget allows. I would not be without my Bahco adjustables as they are used every day. Expensive but worth every penny. On power tools don't bother with cheap as this can be a pain on an evening when even the sheds are closed and dangerous if the clutch on an SDS is a bit harsh. If you cannot afford new but second hand quality stuff Hilti etc on ebay. For occasional use just hire. Whilst at the hire desk look at the makes they are punting as they are guaranteed indestructible and will still be good second hand.

 

[plum ber]

Since I started I have spent a small fortune, Bacho adjustables and a few decent different sizes help, you may want to invest in two of each for when you do comp joints up. A decent Li ion cordless or a set of 2 as I have and an SDS is a must. My tool box is worth thousands as I am ex-RAC ( Ready at Christmas ) ;-)

Monoblock tap spanners are also a must, spanners, pipe bending machine, springs, pliers (snap on lines mans) are the mutts nuts for those rusty screws they grip really well but cost about £100. Erm what else???

Spirit levels, hole saws, the list goes on and on and Ariston........

 

[Orry Clayton]

Gas bottle and an assortment of fittings.

 

[theanalyst]

My main advice would be to buy quality tools, don't cheap out on the main core of your toolkit. You will live to regret it! and end up having to spend twice and buy the good stuff when the cheap stuff breaks or doesn't do the job well.

Mainly power tools - I have Hitachi industrial and Makita industrial cordless. Bosch Blue SDS (well it got stolen actually - now have hitachi as I got a good deal). Hitachi Jigsaw. you get the drift anyway!

Drill bits - Good quality ones are worth the extra, same with 'Stanley' stanley blades (cheap ones are pants IME). The list goes on.. but I still add to my van tools even now. And though I've only been doing gas for a few years, I was building and water plumbing before so had a lot of kit already.