Absent plumber help finish install asap please BH24

[David Lowth]

Looking for a gas safe engineer to complete a boiler and cylinder install in Ringwood BH24. There was a delay of approx 8 months from the install to radiators being fitted and therefore able to comission the system. Our plumber is now employed elsewhere and unfortunately unable to complete this work.

Spec:

GLOWORM ENERGY 30s system boiler
Three 2 port valves to control
Unvented cylinder
WUFH
RADIATORS
My Energi solar power eddi system connected to cylinder as immersion heater.


What needs doing is
-take a fused spur from nearby socket (or I can get one put in prior to job starting)
-wire it all up
-comission boiler and sign off

The parts on site to wire it up are
-ESWC1 wiring center
-Drayton LP722 7 day electronic programmer
-ESi wireless electronic room thermostat
-Drayton RF901 digistat -universal thermostat
-heatmiser slimline v4 digital programmable thermostat.
-my energi eddi system.

I can send photos of current setup. Looking to get this finished
ASAP.

Property located in Ringwood BH24 1NY,

Thankyou for anyone that can help

 

[Ben-gee]

Nobody will do what you are asking without spending a considerable time going over everything that has been done. Anyone who offers to just come and do what you’ve asked should be avoided.

 

[David Lowth]

Finally got an update from him. He cant do the electrics, but is going to get it registered this weekend and will take up to 22 days for the certificate to come through apparently.

Thank god.

So just looking for the wiring to be done so that it is functional with the eddi