Hi all, just looking at pipework for a new en suite sink, its slightly smaller then 1 1/4 so I assume I need an adapter of sorts?
I was just about to put the waste pipe in but want to check before proceeding.
I'll try and attach a pic.
Hi all, just looking at pipework for a new en suite sink, its slightly smaller then 1 1/4 so I assume I need an adapter of sorts?
I was just about to put the waste pipe in but want to check before proceeding.
I'll try and attach a pic.
I'm thinking stuff is metric now, but people often use imperial description as the visualisation is so much better . . . for those of us of a certain age. Can you measure in mm. Also have a look at McAlpine for any waste adapters. Is it continental? Some obscure waste stuff you can find on ebay just fine.
Hi all, just looking at pipework for a new en suite sink, its slightly smaller then 1 1/4 so I assume I need an adapter of sorts?
I was just about to put the waste pipe in but want to check before proceeding.
I'll try and attach a pic.
Sorry my post reads wrongly, I have 1 1/4" pipe but the new chrome basin waste connector is slightly smaller.
I'm hoping it's a common issue fixed with an adapter?
McAlpine Chrome Waste Pipe 32mm 35mm to Plastic Adaptor Elbow 90° Degree 32mm European pipe size/1¼" 90° Chrome Plated Brass Compression Bend x 1¼" ABS Solvent Weld Comes supplied with washer to take 32mm or 35mm Chrome pipe Opposite end desgined to take 1 1/4 INCH solvent weld waste pipe for...