Advice needed | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter furryneddy
  • Start date
  • Replies 4
  • Views 2K

Discuss Advice needed in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
F

furryneddy

Hi all wonder if you can help ? I need to get the tops of some armatige shanks basin taps that are the push top ones you find in public toilets, I tried prising off the blue and red caps but to no avail - theres no where to get a wrench on the body of the tap under the push part of the tap either :confused::confused:

Hoped one of you knowledgeable types would know the secret !!!
 
there may be a alan key point at back of tap,use a mirror to look at back of tap.
 
if for public use would not think they ust pull off as said maybe hole at back for alen key
Maybe a quick call to Armatage is required,let us know
 
Hi all - thank you all for you interest and input :) It turned out that under the caps (red&blue) on the top of the taps which were extremeeeellllly:eek: dificult to remove there was a small screw which when undone did absolutely nothing to enable me to take apart the tap !!!!!!! I have come to the conclusion that these push button armatige shanks taps are not servicable at all :confused::confused::confused:
 
WD40 mate after the screw comes off they lift off, not easily mind ;)
 
Status
Not open for further replies.

Similar plumbing topics

I've tidied up this thread and banned a user...
Replies
2
Views
1K
  • Question
I do not believe that the end cap doesn't come...
Replies
7
Views
646
A
  • Question
Thanks to you all for your thoughts, much...
Replies
5
Views
1K
Hve you tried pulling the large chrome part...
Replies
2
Views
2K
It doesn't matter what plumbing you have...
Replies
5
Views
652
Back
Top