Advice on air admittance valve. Toilet | Boilers | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Advice on air admittance valve. Toilet in the Boilers area at Plumbers Forums

Messages
44
Please see pic! I can't seem to fit this air admittance valve on the back of the toilet. Is there any other fitting I need for this to work.
IMG_20211127_175826695.jpg
 
It’s not really designed for going back there

Isn’t the stack vented externally?
 
It’s not really designed for going back there

Isn’t the stack vented externally?


Why does it have this on the top of the pan connector though!

Yes it has a vent pipe although this is connected to the same soil pipe underneath the floor. See pic below. It was either this or a sani FL w toilet although I was advised against the saniflow because of issues can arise with them.
 

Attachments

  • IMG_20211026_070706796.jpg
    IMG_20211026_070706796.jpg
    195.8 KB · Views: 27
A 32mm elbow just fits under
 
So, the advice would be to get a 32mm elbow and take it away from the toilet a few inches then put the air admittance valve on there. My limited knowledge of these valves I was thinking they had to be on top of the pan connector.
 
You can do that if you want
 
Sorry to be a bit slow and if I've missed the question. Presumably there is a sink associated with each w/c? Could you go for a cabinet style boxed in sink then hide the AAV inside that. Back of the loo could be boxed in also if you wanted. Get it all working nicely first.

The only bee in my bonnet I have about boxing in is the use of veneered chipboard (not good with water) - just my own view.

Cheers,

Roy (amateur)
 
Sorry to be a bit slow and if I've missed the question. Presumably there is a sink associated with each w/c? Could you go for a cabinet style boxed in sink then hide the AAV inside that. Back of the loo could be boxed in also if you wanted. Get it all working nicely first.

The only bee in my bonnet I have about boxing in is the use of veneered chipboard (not good with water) - just my own view.

Cheers,

Roy (amateur)


Small sink in this room however it has its own pipe to the outside.
 
Vertical normally manufacturer instructions will tell you
 
Small sink in this room however it has its own pipe to the outside.
There are lots of subtleties to getting wastes right, so I'd recommend getting a good professional in to sort it (The professionals on here have given lots of good advice). Just for interest (if you are interested) try the following video. Note it is USA plumbing standards not UK, but it gives you an idea of some of the issues you can have. Many amateurs think wrongly for wastes that it's just a matter of connecting stuff together. You obviously understand the need for vents of some kind.


A UK plumbing standard version of such video would be interesting.

Cheers,

Roy
 
There are lots of subtleties to getting wastes right, so I'd recommend getting a good professional in to sort it (The professionals on here have given lots of good advice). Just for interest (if you are interested) try the following video. Note it is USA plumbing standards not UK, but it gives you an idea of some of the issues you can have. Many amateurs think wrongly for wastes that it's just a matter of connecting stuff together. You obviously understand the need for vents of some kind.


A UK plumbing standard version of such video would be interesting.

Cheers,

Roy


Mines goes to the outside and has an elbow emptying into a gully but not connected to the gully. It is open vented.
 
Mines goes to the outside and has an elbow emptying into a gully but not connected to the gully. It is open vented.
Sounds like you want to leave the sink alone then, so the AAV for the WC will have to go at the side of the loo. Perhaps there is some cunning piece of ornamental furniture you could disguise it with? (Get it all working first)
 

Similar plumbing topics

J
Depends on the type of vent he’s installed...
Replies
1
Views
2K
S
  • Question
When you flush the toilet, do you hear any...
Replies
1
Views
382
Either buy the correct one at the higher cost...
Replies
13
Views
1K
A
If the toilet is blocking up gradually it...
Replies
2
Views
278
  • Question
mcalpine sa10v - can you get a replacement...
Replies
6
Views
505
Back
Top