Advice on shower pump replacement | Showers and Wetrooms Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Advice on shower pump replacement in the Showers and Wetrooms Advice area at Plumbers Forums

I

ianbeag

I recently had a replacement double shower pump fitted to replace one which had worked flawlessly for about 12 years. The plumber recommended a make which I had not heard of - Aura twin impeller 2.0bar unit. When either shower is operated the noise level from this unit is the equivalent of a passenger jet at take-off and cannot be used when any of the surrounding bedrooms are occupied. I am now ready to remove and replace the unit and my question to your knowledgeable experts is:- What alternative unit can you recommend to operate two showers but does not disrupt the peace of an entire household? Any suggestion will be much appreciated.
 
Cello Thanks for responding. I though that it would be a simple matter to install a replacement unit for one which was previously trouble free and relatively quiet. I had suggested a Grundfos pump but the plumber fitted this one instead. It would be helpful to have some suggestions from experienced professionals for a reliable pump that is reasonably quiet in operation.
 
Upvote 0
Stuart Turner can't go wrong. Might be installation problem, air, no flange fitted on cylinder etc. Check all valves in and out of pump are open
 
Upvote 0
The make of the pump is probably less important than the type of pump.

If you want to keep the noise down, you need a centrifugal pump, NOT a regenerative pump.

The latter are cheaper to make, and are often more forgiving of sub-optimal installs, but the stripping block on a regenerative pump is what gives it that whining, jet turbine noise.

Try a centrifugal pump, for example the Salamander RSP range (but not the CT range).
 
Upvote 0
Thank you Ray & Neil for taking the trouble to respond. I was not aware of the two concepts of centrifugal and regenerative operations and that will help to build up useful bank of information before making the choice of replacement pump.
 
Upvote 0

Similar plumbing topics

  • Question
Should work. It's not on the floor, but at...
Replies
1
Views
1K
  • Question
Ah, thanks - I'd assumed it £260 just to look...
Replies
3
Views
2K
Replies
1
Views
970
  • Question
Hello, just to make you aware that the...
Replies
5
Views
2K
Back
Top