Advice on vertical flue

[mutley racers]

Morning guys. I have not done many vertical flue installs and am wondering what's the best way to run this flue to get the correct distance from the chimney pots. So it looks like I need to be 1200mm away from them. Is this even with the flue's not in use? Or is there a cap I can put on these If they are not in use.



Unfortunately there is no where else for the boiler to go.

 

[ShaunCorbs]

You changing the boiler muts ?

 

[mutley racers]

Yes changing it

 

[ShaunCorbs]

Can't you go straight out through the boxing ? With a plume kit of course

 

[mutley racers]

I believe the boxing is actually the chimney breast which the conversion has been built around?

 

[mutley racers]

Maybe you are correct. I could use a couple of elbows and go around the chimney and out by the window and then use a plume kit with extension to run along the soffit and terminate. No need for a roofer then either

 

[mutley racers]

Made a right cock up today. Thought my acs expired on 9 may and just checked documents and it is the 9th of march. Eek!!! What a numb skull. Can I still do gas work on the 9th of March? The final day

 

[ShaunCorbs]

Yes you have till the end of the day

 

[mutley racers]

Another question, how London do you have once your gas safe registration has expired to re register before being classed as a new guy? Cannot seem to find it on the site

 

[ShaunCorbs]

Another question, how London do you have once your gas safe registration has expired to re register before being classed as a new guy? Cannot seem to find it on the site

You would have to speak to them on that (gas safe) but I think it's less than 6 months

 

[mutley racers]

Thanks Shaun. I was hoping it was longer than a month as I don't want to have to pay full wack again

 

[ShaunCorbs]

Thanks Shaun. I was hoping it was longer than a month as I don't want to have to pay full wack again

speak to them i would and get it in an email

 

[mutley racers]

Is it possible to use a mcapline boss connector on the boss section of this tee if I remove what is left of boss connector? I really don't want to have to break all the boxing out and put a new tee piece in to be honest

 

[ShaunCorbs]

No shame someone cut the boss off

 

[mutley racers]

So you don't think I could file old parts off to tee and then cut this in but 10mm over to the left a bit

 

[ShaunCorbs]

Don't think it would work tbh

 

[Masood]

Can you put a glue-in or strap-on boss on the black soil coming in horizontally?