Advice wanted for new boiler and unvented heating system

[clearchoice]

Hi,

I'd really appreciate any advice or suggestions for a new system I need to install this week. It's a 3 storey, large stone built detached house. It currently has a floor mounted system boiler, open flued. The customer wants to upgrade the whole system to a new boiler and unvented cylinder. Next year they want to add underfloor heating to the ground floor and then an additional 3 separate heating zones throughout the house.

what system would you suggest?

many thanks in advance

 

[Killy Bing]

....not being funny mate, but if you have to ask us that

should you be installing it?

 

[Ch4 plumbing]

....not being runny mate, but if you have to ask us that

should you be installing it?

Have you had a bad curry KB?

 

[Ermintrude]

The choice is clear. 40kw ravenheat combi

 

[Ermintrude]

Need a little more info. Load, fuel type how much wonga is being splashed!

 

[gasmanrob]

The choice is clear. 40kw ravenheat combi

Had to work on one of their newer offerings a while back and I have to say for a ravenheat I was impressed! It was actually pleasant to work on

 

[Killy Bing]

Have you had a bad curry KB?

Only just got back from sorting out a 37 cdi worcester i installed a year ago.

internal expansion vessel split!!

it now has a 24 litre sat beside it.
on mothers day haven't seen the ma all day
I've gotten back and shes in bed, slightly disapointed in myself over it

back to the op

what do you want to know sir?


sounds like thay are savvy, you could push for putting weather comp on the system.

Where can you put the boiler and cylinder?
do you have an area for it?
where do you plan to put the manifold?

if you can get them all in the same area, say back of the garage.
acv or OSO super series cylinder
your boiler of choice.........intergas or atag

put in all the zones now ready so you have everything planned and spaced out.
make sure you fit your auto bypass!

 

[LPC]

You're installing it this week but you haven't even worked out what system or boiler you're installing yet?

I'm starting an install tomorrow too. I have everything in my van right now ready to go and a detailed plan of what I'm going to do, when and how.

You in trouble!

 

[Scott_D]

Must be a wind up

 

[Gray0689]

Only just got back from sorting out a 37 cdi worcester i installed a year ago.

internal expansion vessel split!!

it now has a 24 litre sat beside it.
on mothers day haven't seen the ma all day
I've gotten back and shes in bed, slightly disapointed in myself over it

back to the op

what do you want to know sir?


sounds like thay are savvy, you could push for putting weather comp on the system.

Where can you put the boiler and cylinder?
do you have an area for it?
where do you plan to put the manifold?

if you can get them all in the same area, say back of the garage.
acv or OSO super series cylinder
your boiler of choice.........intergas or atag

put in all the zones now ready so you have everything planned and spaced out.
make sure you fit your auto bypass!

Weather comp on underfloor heating is pants

 

[Ermintrude]

Works pretty well for rest of zones? The comp doesn't really effect ufh ? As it's blended at mani?

 

[Gray0689]

Works pretty well for rest of zones? The comp doesn't really effect ufh ? As it's blended at mani?

Not really a fan for domestic houses ermi

 

[Ermintrude]

Ok done some research.

X kW ideal logic heat only or two ideals on LLH or a worster cdi regular 40kw
Lots of heating zones
ACV super multi energy tank
External expansion
Wilo pump
Solar

 

[Roger Welton]

Suprised your not keen in the ideal Evomax for 40kw ermi looks like a logic on steroids

 

[Ermintrude]

Evomax is a shed of shister. Huge case and no balls!