S
sasikahlon
My customer have an unvented hot water cylinder (Ariston). They reported that when they run hot water out of any hot tap at the house there will be quite a bit of air coming through too. It's a bit like when you run the cold taps after the system was drained down.
Is anybody know what could be the problem and how come there is such a build up of air in the unvented cylinder.
Ps This is not a new installation, the cylinder was fitted 10 years ago and the air problem only started recently.
Is anybody know what could be the problem and how come there is such a build up of air in the unvented cylinder.
Ps This is not a new installation, the cylinder was fitted 10 years ago and the air problem only started recently.
