Air lock ? | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Paul C
  • Start date
  • Replies 1
  • Views 528

Discuss Air lock ? in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
P

Paul C

Hi I drained vented system down to replace a rad now filled up and bled pump and rads. Boiler ( oil) fires up and the central heating outlet is cold & pump is running. The feed pipe to the hot water tank is scalding hot but then no water is getting to the storage tank. This water is so hot it then turn the boiler off so my central heating is cold. Do I need to drain down again will this help? How do I fill up again and stop this happening ?
 
Circulation problem. Check for any vent points on flow and return that need manual opening. Manually open motorised valves and ensure pump is rotating.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
You’re a genius, thank you! Held my thumb over...
Replies
2
Views
999
  • Question
Red circles show my new AAVs and the manual...
Replies
17
Views
2K
J
  • Question
They will change the cylinder there’s no need...
Replies
1
Views
713
  • Question
Before doing this, check the level in the cold...
Replies
9
Views
1K
  • Question
Not strong enough to pump the water round or a...
Replies
3
Views
1K
Back
Top