Hi all, I have an Alpha Boiler - Intec 34C with gas saver and thermal store.
I’ve developed an intermittent problem with the DHW, on central heating the boiler ignited fine, however when the DHW is run (opening a tap) the boiler fires, cuts out, fires cuts out etc. Ending up with the E01 code. I’ve had a heating engineer round and had a full service and the electrodes cleaned. Gas pressures are all fine, nothing picked up on service as was running fine when the engineer arrived - typical. It happens daily, however works 50% of the time. Not sure whether it’s electrode replacement, PCB issue or something we’re missing? Anyone got any advice? I won’t be tackling the job myself, just don’t want to get ripped off if there’s a simple fix? Thanks in advance. Ohh yeah, 1 year out of warranty too! Installed in 2012.
I’ve developed an intermittent problem with the DHW, on central heating the boiler ignited fine, however when the DHW is run (opening a tap) the boiler fires, cuts out, fires cuts out etc. Ending up with the E01 code. I’ve had a heating engineer round and had a full service and the electrodes cleaned. Gas pressures are all fine, nothing picked up on service as was running fine when the engineer arrived - typical. It happens daily, however works 50% of the time. Not sure whether it’s electrode replacement, PCB issue or something we’re missing? Anyone got any advice? I won’t be tackling the job myself, just don’t want to get ripped off if there’s a simple fix? Thanks in advance. Ohh yeah, 1 year out of warranty too! Installed in 2012.