Alpha cb24 problem | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Alpha cb24 problem in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
N

nabby 68

Hi
got a problem with an alpha cb24, I have no hot water at all even when I've set the control knob to hot water only. How do I check to see if it's the flow switch or diverted valve or diaphragm.
is Alphaman about!
thanks
 
This plumbing forum will not provide advice to anybody with regards to boiler repairs or any other form of gas plumbing without you first providing us with your Gas Safe Registration number in a thread - for very obvious reasons. If you're not qualified to touch gas, you should stay well clear of trying to!
 
Hi
got a problem with an alpha cb24, I have no hot water at all even when I've set the control knob to hot water only. How do I check to see if it's the flow switch or diverted valve or diaphragm.
is Alphaman about!
thanks


PM a mod and they check you are GS registered, there is another section of the forum where boiler repairs are discussed.
 
Status
Not open for further replies.

Similar plumbing topics

    • Like
Alpha 2/3 manual. Shows variant with air...
Replies
8
Views
1K
It's a sealed system so if its leaking from...
Replies
1
Views
810
Are you Gas Safe Registered? If not please...
Replies
2
Views
610
  • Locked
Yes mut pcb if you haven't got voltage at the...
Replies
2
Views
102
Worked a charm, thanks a lot Shaun!
Replies
6
Views
1K
Back
Top