D dsmart Plumbers Arms member Plumber Gas Engineer Messages 187 Feb 23, 2015 #1 Second one I've went to that the fga test point was knackered! Used big flat head still no joy couldn't get the bugger out ?
Second one I've went to that the fga test point was knackered! Used big flat head still no joy couldn't get the bugger out ?
Alpha man Gas Engineer Messages 1,137 Feb 23, 2015 #2 You won't shift that, if you can't put it in the flue terminal, don't bother!!
D dsmart Plumbers Arms member Plumber Gas Engineer Messages 187 Feb 23, 2015 #3 Nah it was 3 storeys up so wasn't hanging out the window for that pile of scrap!
R Rickster123 Feb 23, 2015 #5 newcastle phill said: How do you proceed with that then ?? Click to expand... Add the cost of a cherry picker onto the service!
newcastle phill said: How do you proceed with that then ?? Click to expand... Add the cost of a cherry picker onto the service!
Alpha man Gas Engineer Messages 1,137 Feb 23, 2015 #6 Write on the CP12 that you are unable to test the co/co2 due to access issues!
Leo21 Esteemed Plumber Gas Engineer Subscribed Messages 9,306 Feb 23, 2015 #8 Surely that's AR? Unable to verify safe combustion.
N neily01 Feb 23, 2015 #9 Only required to do a fga with a premix burner, if its a normal burner with a secondary hex ( band b ) flame picture check is ok.
Only required to do a fga with a premix burner, if its a normal burner with a secondary hex ( band b ) flame picture check is ok.
Leo21 Esteemed Plumber Gas Engineer Subscribed Messages 9,306 Feb 23, 2015 #10 My mistake, thought it was a band a.