Alpha CD28X no lights or power. (combi) | Plumbing Jobs | The Job-board | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Alpha CD28X no lights or power. (combi) in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

Allgoode

Gas Engineer
Messages
285
Hi all,
Just a bit of advice re this boiler.
Customer called to say no lights or operation at all in any mode.
Visited about 8pm on way back from other work and tested. power coming through to boiler but iaw instructions checking with multimeter nothing on the pins which led me to diagnose the PCB was gone.
There is no service coverage down here in Cornwall & boiler has broken before, previously under warranty and customer had issues getting coverage.
Is there something I have missed as was knackered when running through checks after long day.
Customer has indicated wants to discuss options so poss may go down route of new boiler sooner than later,
Thanks,
Andy
 
Was gonna say fast blow. It's then a case of what caused it to blow though
 
There's a couple of fast blow fuses on the PCB, normally the fan or divertor motors will cause the fuses to blow!
 
Last one of these I had diverter was letting water theough
 
Status
Not open for further replies.

Similar plumbing topics

You need a new service engineer not a new...
Replies
3
Views
977
N
Hi,did you fix intermitent L-F ? I have same...
Replies
9
Views
3K
Mikesin
M
great, thanks for sharing, really difficult to...
Replies
2
Views
2K
Back
Top