T
tommy1712
Just had a call out to a alpha cd35c
Completely dead = pcb fuse popped.
Replaced fuse and did short circuit test to try and find why it went, was reading 35.8 ohm unplugged everything but sill only 35
To my understanding of breakdowns (limited) it should read over 100ohm
Fired boiler up and all was good
I think there's s pcb error
Any other ideas please lads
Completely dead = pcb fuse popped.
Replaced fuse and did short circuit test to try and find why it went, was reading 35.8 ohm unplugged everything but sill only 35
To my understanding of breakdowns (limited) it should read over 100ohm
Fired boiler up and all was good
I think there's s pcb error
Any other ideas please lads