Alpha he cb25, flashing lights, repressurised

[Wonderland]

Yesterday I bled the radiators for the first time in the flat that I bought last year. Today my boiler was displaying red and Amber flashing lights which, when I checked online, meant that the system had depressurised. I have then used the filling loop to re-pressurise the system and have got the needle back to within the green zone on the display (it's at roughly one bar). The flashing lights will not stop though and I am not able to use my boiler. Has anyone got any advice please? I've looked at manuals online but can't find anything helpful

 

[SimonG]

Reset it. Turn it off then on. Put the pressure slightly higher. Then into realms of a gsr engineer.

 

[Mgrant]

Think alphas need resetting after a fault. This is done by turning one of the dails on the front all the way to the left.

 

[Unregistered]

I'll try the reset. I did it briefly earlier but it didn't seem to affect it. Fingers crossed

 

[Mgrant]

Or as simon above says take the pressure higher to the top of the green zone.

 

[Wonderland]

It's working! Thanks for your help and suggestions. I think it just needed a little while to sort itself out after adjusting the pressure. I've got hot water and the radiators are on!

 

[Dotty]

Thank you for coming back to let us know how you got on.

 

[Alpha man]

You got off lightly !! Lol