Angled isolating valve advice | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Angled isolating valve advice in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
2
Hi,

I have a dripping current valve.

Its after a bit of a saga with plumber. They have told me I will have to get entire new magnaclean that it is connected to. I dont think that is right and surely I can just isolate this valve from other valves in line, and then replace with another angled valve?

If so do you have any recommended suppliers. I believe it is a 22mm valve. I found one supplier here:

Universal Angled 90 Degree Isolation Valve 22mm x 3 4 For ALL Boilers 3002160280

Any advice please?
IMG_9148.JPG
 
If you phone adey up they will send you new valves let me guess they had red heads they always leak new ones are black
 
Contact adey they will provide a replacment theres a good warranty on their products. Cheers kop
 
Status
Not open for further replies.

Similar plumbing topics

Thanks All. After much persuasion the...
Replies
5
Views
578
  • Question
Also I don't think he'll be able to get a bit...
Replies
12
Views
2K
  • Question
Thank you all for the responses, exactly the...
Replies
4
Views
834
  • Question
Nice one. Thanks. Got them off and was able to...
Replies
2
Views
994
  • Question
There was a single tap causing the issue. We...
Replies
2
Views
705
Back
Top