Any advice appreciated on costs of work | Gaining Plumbing Experience | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Any advice appreciated on costs of work in the Gaining Plumbing Experience area at Plumbers Forums

Z

zoecan82

Hi

We have had a few problems with our heating for a while.....a plumber we have had said our heating system is not very good as we cannot have the heating and water on seperately...so like now in the summer we have to turn all the radiators off, as we need hot water but not heating. This caused a really noisy airlock today!

anyway we have been quoted £465 + vat to do work which would mean we could have a seperate operating system for the heating and hot water.

their quote said - drain down the system and replace 3 port valve and cyclinder stat with new and remove time switch and replace with programmer. rewire system to suit

is this the sort of price we should pay or should we get more quotes.

thanks for any help as such alot of money...but would like control over system
 
bit on the steep side i think but without looking at system and what controls you have at present
3 port and cylinder stat about 80.00
inhibitor 15.00
labour 150.00
so not sure what controls you have and what is being replaced i personally would have started with the 3 port and gone from there
 

Similar plumbing topics

Who said plastic 28/22mm copper tube and mlcp...
Replies
3
Views
795
M
Isolate and drain boiler. Pump up expansion...
Replies
1
Views
729
Np Simon. Hoping to get the boiler engineer...
Replies
4
Views
878
T
Get an acv cylinder. Great for boiler and work...
Replies
2
Views
688
Back
Top