Any G3 installers with commercial experience in Manchester area?

[Neil T]

Hi,
Looking for a G3 installer to fit a couple of electric water heaters in a bar/restaurant in Manchester centre.
Can reply on here or pm me.
Cheers

 

[ShaunCorbs]

when you looking for the job done?

 

[Neil T]

Customer is looking towards end of march, early april. I'm in to do first fix mid march then obviously joiners/ plasterers will be in next.
Heaters need to be sufficient to provide sustainable h/w for 3 basins in toilets, 2 prep area sinks, a glass washer and 2 bar sinks. Ideally need twin heaters as it's a bar/ restaurant so no loss of supply.
Would you have any recommendations on heaters and have you done similar installations so you can advise on requirements for piping to the heaters.
Cheers

 

[king of pipes]

I have installed a megaflo direct hot water system manufactured by Heatrea sadia in a ASK resturant in Norwich worked well and no external vessel needed space is always a problem on these jobs so a site vist is a must before you quote 180litre was ok for their needs .

 

[ShaunCorbs]

Customer is looking towards end of march, early april. I'm in to do first fix mid march then obviously joiners/ plasterers will be in next.
Heaters need to be sufficient to provide sustainable h/w for 3 basins in toilets, 2 prep area sinks, a glass washer and 2 bar sinks. Ideally need twin heaters as it's a bar/ restaurant so no loss of supply.
Would you have any recommendations on heaters and have you done similar installations so you can advise on requirements for piping to the heaters.
Cheers

That would be OK for us

Do you know incoming water main size pressure flow etc ? And would need a site visit

And done plenty of jobs like these