Any tips on how to get this out chaps

[king of pipes]

Struggling to get the turbine out of a ideal tonight any tips chaps ? Its welded in looking like more parts needed . Cheers kop

 

[quality]

I have had them before very very stuck and managed to get good purchase on them with a set of mole grips

 

[oz-plumber]

You need a socket set or ring spanner.
Normal spanners and he like will only force from 2 sides.
You need force on the whole 6 sides

 

[townfanjon]

Its a while since I did one but I think I used an 18 mm socket , try a very slight “ tighten’ first .

 

[Harvest Fields]

Is that the same type as the new Potterton/Baxi ones?

 

[king of pipes]

Similar H , i ordered the housing return block as plan B if it snaps on me at least i can complete the repair will try the socket first though . Cheers for the tips chaps . Merry Christmas to you all. Regards kop

 

[Harvest Fields]

I had to replace the whole thing

 

[king of pipes]

Yes mate same here the whole thing got swapped sorted nowx. Kop