Anyone identify this inlet valve?

[WaterTight]

enters cistern on the end of a 3/8" hose, clipped to the flush valve.

Thanks

 

[PlumbersMate]

Think it's Geberit

 

[PlumbersMate]

Looks same

 

[WaterTight]

Ah quality! That looks as near enough makes no difference. Thanks!

 

[iiplumbing]

How's that held up? A clip off of the flush valve?

Russ

 

[Whyme]

yep..

 

[iiplumbing]

yep..

Sarky lol

 

[WaterTight]

i'm guessing..... you could just install bottom entry 3/8" fluidmaster?

thoughts?

 

[WaterTight]

ttttthhhhhooughts?

 

[fogarty]

If you can answer yes to these questions then then your on your way .
3/8 hole in bottom of cistern ?
Enough clearance for fluid master ?
Enough fittings to reach new entry ?
:icon14:

 

[oz-plumber]

Some advice..

Make sure you get a new clip with the cistern inlet valve.
They generally break when you take the old valve out,

And the valves cost 2 to 3 times what a normal inlet valve costs.

 

[WaterTight]

If you can answer yes to these questions then then your on your way .
3/8 hole in bottom of cistern ?
Enough clearance for fluid master ?
Enough fittings to reach new entry ?
:icon14:

Or perrrrrrrrrrrrrrrrrrhaps I didn't think to check when I had a look alright? Mayyyyyyyyyyybe I was just hoping on a whim someone would just tell me they had exactly the same toilet and set up and it did. Possssssssssssssssssssssssssssibly I'm an idiot. But what of it?

 

[fogarty]

Or perrrrrrrrrrrrrrrrrrhaps I didn't think to check when I had a look alright? Mayyyyyyyyyyybe I was just hoping on a whim someone would just tell me they had exactly the same toilet and set up and it did. Possssssssssssssssssssssssssssibly I'm an idiot. But what of it?

Just tongue in cheek. No offence meant.:wink_smile: