Anyone installed a Worcester 37cdi?

[Nas]

I'm in the middle of fitting one of these, Everything has gone ok apart from the PRV. How does the the plastic bottle under the PRV connect to it? Is it simply a loosening the nut and pushing it up?
:confused5::confused5::confused5::confused5::confused5:

 

[tamz]

It connects itself.
Drop the boiler on the jig then push the plastic bit up to fully seat it.

 

[desrob]

I'm in the middle of fitting one of these, Everything has gone ok apart from the PRV. How does the the plastic bottle under the PRV connect to it? Is it simply a loosening the nut and pushing it up?
:confused5::confused5::confused5::confused5::confused5:

....???????......

 

[Nas]

It connects itself.
Drop the boiler on the jig then push the plastic bit up to fully seat it.

That's what I thought but the nut holding the plastic bottle was stopping it going up far enought to connect to the PRV. Does the nut need to be removed or loosened.

 

[tamz]

The nut doesn't affect the plastic bit. You should pull it down before mounting the boiler then push up to fully seat it.
Here is the picture from the book.

 

[Billy Bob Bob]

what a crap idea by worcester and a pig to change when the prv gets incontanance

 

[royalflush]

Haha you wait until you have to change one..........