Hi Guys,
I replaced an electric shower the other day for an aqualisa energy 8.5kw. all went well with the installation, but when i turned it on it blasted water on cold but to get the shower to run hot i had to turn the dial almost all the way up which then resulted in the water flow going pretty poor, not quite a trickle but it was pretty pathetic, my question is is this a fault? i put a ballofix in the pipe work so the shower could be isolated, the electrics is all sound and the water flow from the mains is good as is the pressure, i cant understand why it has gone so so low and why the dial has to be turned all the way up. (if i set the dial to max it gets scorching hot but i have to tweek it down slightly to get it to a comfortable temp. its just the flow goes poo. anyone know why this is? is it something i did or is the shower faulty or is that just how the shower is meant to be (surely not)?
Hope someone can help
Cheers guys
J
I replaced an electric shower the other day for an aqualisa energy 8.5kw. all went well with the installation, but when i turned it on it blasted water on cold but to get the shower to run hot i had to turn the dial almost all the way up which then resulted in the water flow going pretty poor, not quite a trickle but it was pretty pathetic, my question is is this a fault? i put a ballofix in the pipe work so the shower could be isolated, the electrics is all sound and the water flow from the mains is good as is the pressure, i cant understand why it has gone so so low and why the dial has to be turned all the way up. (if i set the dial to max it gets scorching hot but i have to tweek it down slightly to get it to a comfortable temp. its just the flow goes poo. anyone know why this is? is it something i did or is the shower faulty or is that just how the shower is meant to be (surely not)?
Hope someone can help
Cheers guys
J