Ariston primo 150 immersion

[armyash]

Hi guys

Need to change the economy 7 immersion on this cylinder
Assuming it will only take a straight swap. Anyone familiar with these are they fitted the same as a normal immersion?

 

[rpm]

Economy 7 is only a name given to a tariff that starts and ends at certain time mate, straight swop over of the element.

 

[tolly]

Hi guys

Need to change the economy 7 immersion on this cylinder
Assuming it will only take a straight swap. Anyone familiar with these are they fitted the same as a normal immersion?

worth changing the anode on these at the same time

 

[jaydebruyne]

Hi guys

Need to change the economy 7 immersion on this cylinder
Assuming it will only take a straight swap. Anyone familiar with these are they fitted the same as a normal immersion?

I'm pretty sure they'll have an 1 3/4 inch thread with an o-ring to keep it water tight. Other than that they just screw out like standard vented cylinder immersion I believe...

 

[gassafe]

I'm pretty sure they'll have an 1 3/4 inch thread with an o-ring to keep it water tight. Other than that they just screw out like standard vented cylinder immersion I believe...

Is the one that looks like a regular immersion until you drain it all down to find out it's got a tiny thread refill & order an overcharged one instead!! Grr

 

[armyash]

Picking it up from pts in the morning. I hope it's the right one.

 

[jaydebruyne]

Picking it up from pts in the morning. I hope it's the right one.

As long as it has a smaller thread (1 3/4 inch) and an o-ring seal - same as the megaflo's) it should be ok

 

[rocketmanbkk]

Did you do it Ash?