Auto airvent for domestic HW | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

  • Thread starter Marty32
  • Start date
  • Replies 3
  • Views 2K

Discuss Auto airvent for domestic HW in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.
M

Marty32

Hi folks

Might be a silly question but would it work in any way to put an autoairvent on a DHW pipe like CH primary if the pipes were prone to airlocks?

Just a thought instead of ripping out and making horizontal or to correct falls?

Cheers for your thoughts and any reasons why this may not work ;)

Mart
 
Fair point just thought it'd be easier than trying to find the iffy pipe work that someone has done before?

Thanks for your quick reply
 
If its only for charging the system or occasional use then fit bleed caps. Auto vents can get scaled up and leak on DHW.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Before doing this, check the level in the cold...
Replies
9
Views
1K
  • Question
Red circles show my new AAVs and the manual...
Replies
17
Views
2K
  • Question
Hi there. I was wondering if anyone had any...
Replies
0
Views
1K
  • Question
Many thanks, I have a probe thermometer so...
Replies
2
Views
652
  • Question
OK thanks for the response. I hadn't...
Replies
5
Views
834
Back
Top