Bad flue repair | Air Sourced Heat Pumps | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Bad flue repair in the Air Sourced Heat Pumps area at Plumbers Forums

Status
Not open for further replies.

AllyBongo

Plumbers Arms member
Plumber
Gas Engineer
Messages
499
We're doing a bit of refurb work in a rented commercial property, the gas work is being carried out by the landlord's so called engineer. My partner was round yesterday afternoon, on arrival he spotted a new Worcester Greenstar flue sticking through the wall with a terminal guard fitted. Thinking there was a new boiler installed he went in to find.... The existing Baxi 105e SE combi still in place, Baxi 105 flue bend in place with the Greenstar HE telescopic flue stuck into the bend and taped up with foil tape!!! The previous Baxi flue was damaged. Needles to say the appliance has been disconnected and is not in use.

The guy taking on the property (a friend of ours) said the engineer and the landlord work together renting properties, and the guy just somehow got himself through a gas course and got himself registerd just to work on their properties! The flue had been installed yesterday morning and the boiler had not been fired up since, quite scary to think what could of happened if this had went un-noticed...

Anyway, our friend has asked us to repair the boiler properly and he will bill the landlord. But this "engineer" is clueless, I would imagine this is one for Riddor, and a call to Gas Safe. Never been in a situation like this before, whats the whole process like, does it bring a lot of hassle/time upon ourselves?
 
No call to Gas safe neccessary (but no harm in doing so).But you are REQUIRED to RIDDOR.

Although I've never done it..................

RIDDOR is now done online, so AFAIA it is relatively painless. Uless the other "engineer" finds out
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Final Update... Thank you everyone who...
Replies
12
Views
3K
  • Question
the gas valve might just need resetting
Replies
5
Views
1K
S
Nothing other than a pain to work on not...
Replies
1
Views
661
  • Question
Yes it's puzzling why only one company...
Replies
2
Views
899
  • Question
No to put too fine a point on this, but would...
Replies
15
Views
3K
Back
Top