Ballpark charge for power flushing 10 rads, system boiler OV | Boilers | Plumbers Forums
Guest viewing is limited

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Ballpark charge for power flushing 10 rads, system boiler OV in the Boilers area at Plumbers Forums

Jim Goodenough

Esteemed
Plumber
Messages
654
Hi all,

Would someone give me an idea of what you'd charge to power flush a 10 rad system (I'll hire machine from BSS).
15mm pipework (NOT 8 or 10)
Glow-worm Flexicom 24hx boiler
Open vent.

Cheers Jim
 
Depends how bad but I would say around a day to day and a smidge so 300-400
 
I'm with Shaun, I'd be starting at £400. Predose the system and leave to run for a week, then do the flush (more chemicals). It may well be more if you consider that the pipework will probably need reconfiguring/ air seperator in the airing cupboard
 
A long days work, plus the chemicals, plus a pre treatment , to do this properly
only get the best in, cheap skates will take your money, screw your heating up
and never come back. cemtralheatking
 

Similar plumbing topics

Thanks, yes I will ask him when he comes in a...
Replies
2
Views
1K
I once had a similar experience with my old...
Replies
6
Views
947
Thanks Enthalpy, Your conclusion is exactly...
Replies
12
Views
2K
hello, old post but what did you go with in...
Replies
11
Views
8K
Deleted member 131795
D
Original plastic pipe did not have a barrier...
Replies
11
Views
3K
Back
Top