Basin trap issue

[Old Account]

Hi guys

has as anyone an idea how to solve this basin with an over flow?
where could I get similar parts or something equivalent?
Below is the link with the picture

Zippyshare.com - IMG_0381.PNG

 

[Last Plumber]

CRIKEY !

What a mess !
I can't think. Can you not just replace it with a combination basin waste ?

What's up the other end of the overflow pipe ?

Can you not replace all the lot or is it part of the basin

 

[Last Plumber]

CRIKEY !

double post

Getting fed up with this

 

[Old Account]

CRIKEY !

double post

Getting fed up with this

I'd change the whole lot but the overflow is not integrated into the basin so a little difficult to get an overflow with waste

Where can I get the right whole lot ?

Thanks for your help last plumber

 

[Last Plumber]

I'd go into plumbers merchant with the photo tbh.
You can get combination wastes with an overflow like that. Similar to what you'd put on a kitchen sink !
Or a bath.

 

[Last Plumber]

I'd go into plumbers merchant with the photo tbh.
You can get combination wastes with an overflow like that. Similar to what you'd put on a kitchen sink !
Or a bath.

 

[Old Account]

I'll definitely go and try chasing the stuff. Thank yo for your help I appreciate your time and effort.

 

[tomplumb83]

Compression bend, compression tee with spigot on the end. Then you just have to join that corrugated thing to the spigot

 

[Old Account]

Compression bend, compression tee with spigot on the end. Then you just have to join that corrugated thing to the spigot

Thank you very much , just sorted it out in similar way.

Thanks for your help

 

[Old Account]

Compression bend, compression tee with spigot on the end. Then you just have to join that corrugated thing to the spigot

Thank you very much , just sorted it out in similar way.

Thanks for your help