bath and basin to fit...how much. | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss bath and basin to fit...how much. in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

moogwai

Plumbers Arms member
Plumber
Gas Engineer
Messages
1,343
Dudes,i have an awkward straight swap bath and basin to fit,not done one these for a long time and was wonderin how much you guys are chargin these days.
i have to take off a shower screen,possibly 1st row of tiles and renew. Will have to renew pipework to bath as its old and new bath won't slot right onto feeds.
i also have a swap over of an kitchen inset sink to do at the same house...probably at least a good days work.
 
It sounds like a LONG days work. Poss even 2 days. I'd be looking for £350-£400. Dont underprice yourself. Removing old tiles and putting new ones in can be tedious and time consuming.
 
Plucky's right.
Break the job into stages e.g.
water off, drained
screen
carefully ( with chisel n ammer) cut tiles out
remove suite and possibly door architrave
fit flexis with isos etc for speed
Definately 2 days and make sure you price everything up adhesive,grout, waste pipe, new basin brackets etc.
I would charge around £300-£380 plus parts.
Just do it;)
 
Status
Not open for further replies.

Similar plumbing topics

Just to round this off with what I found here...
Replies
5
Views
784
Your choice really mate the steam will affect...
2
Replies
28
Views
570
The old adey ones had the same problems the...
Replies
1
Views
2K
F
  • Question
1. If you have a combi boiler then, unless you...
Replies
1
Views
2K
I havent yet....but it's looking like TMV's...
Replies
5
Views
156
Back
Top