Bath mixer tap problem | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Bath mixer tap problem in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
D

defender1007

Hi. I have a tantadisc 2 hole bath mixer tap with shower attachment that was fitted in 2002. Noticed the cold water tap is getting harder to turn off (stiffer). I suspect it requires a new ceramic cartridge. After extensive internet searching I cannot find any information regarding this tap and spares. Does anyone have any info on these taps?
 
you should be able to pick up the disks from a plumber merchant but better sill is to replace the compleat tap bodies they are available in 3/4 or 1/2
 
Status
Not open for further replies.

Similar plumbing topics

Have you got a photo of the sink at the...
Replies
2
Views
546
  • Question
If there are no grubs screws it will just pull...
Replies
1
Views
840
  • Question
Installing a P-shaped shower bath in a small...
Replies
5
Views
879
  • Question
For £60 ish quid might be best just to replace...
Replies
3
Views
1K
  • Question
Hi, there is no grub screw. I have attached...
Replies
6
Views
365
Back
Top