Bath mixer tap problem | Plumbing Jobs | The Job-board | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Bath mixer tap problem in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.
Messages
3
Hi all,

I have a problemwith the hot water from my bath tap. Thetap is a mixer type and the cold water works fine. I’m also getting hot/cold water from thesink.

I’m not sure whatthe problem is, i.e. does the tap need replacing or the does the spindle needreplacing. Can anyone advise me?

I’ve been quotedaround £40 by a plumber to replace the bath taps, but this is almost half adays wages for me so I want to try and tackle myself.

Thank you.



 
Coud be the washer, could be the guts have failed.

40 to swap bath taps, snap his arm off.
 
Can you post a picture of the tap? Could be a variety of things depending on the type of tap.
 
Status
Not open for further replies.

Similar plumbing topics

  • Question
Thankyou, I have already installed a hot and...
Replies
13
Views
833
Hi It's a combi boiler so yes. Unless there...
Replies
2
Views
853
  • Question
I’ve got exactly same problem. I have to put...
Replies
30
Views
4K
  • Question
You've fecked up, it's not the way to do it...
Replies
18
Views
1K
  • Question
You are confusing pressure and flow. Your...
Replies
6
Views
4K
Back
Top