Bath waste | UK Plumbers Forums | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Bath waste in the UK Plumbers Forums area at Plumbers Forums

G

Graham Taylor

Hi all, at the moment we have a shower/wet room. We want to install a bath but I'm having a problem as to where the waste from the bath can go, as by doing a bit of research the shower waste will not be able to take the bath wath water away quickly enough.
Landlord will not permit us to drill through the outside wall so my question is- can I connect the waste from the bath into the waste from the toilet (see photo) or can this cause problems I am maybe unaware of.
There is approx 100mm from floor to where the bend meets the downpipe to enable me to use a boss to connect bath waste pipe.
cheers Graham
 

Attachments

  • 1898722D-0952-4E96-B9B5-D9CFB8F8B86E.jpeg
    1898722D-0952-4E96-B9B5-D9CFB8F8B86E.jpeg
    135.7 KB · Views: 24
Yes you can boss it into that vertical brown pipe.

1) You must use a 76mm water seal trap on the bath, not a shallow trap - even though that would be easier.

2) you may find that the brown pipe won’t solvent weld very well. So I would a) get a strap boss that has a nut/bolt connection, b) connect flange of boss to the pipe with CT1 instead of solvent weld.

3) make sure you don’t insert pipe from bath waste too far- if it goes inside the 4” pipe it will catch paper etc from the lavatory, which will give you grief.
 
Yes you can boss it into that vertical brown pipe.

1) You must use a 76mm water seal trap on the bath, not a shallow trap - even though that would be easier.

2) you may find that the brown pipe won’t solvent weld very well. So I would a) get a strap boss that has a nut/bolt connection, b) connect flange of boss to the pipe with CT1 instead of solvent weld.

3) make sure you don’t insert pipe from bath waste too far- if it goes inside the 4” pipe it will catch paper etc from the lavatory, which will give you grief
 
Last edited by a moderator:

Similar plumbing topics

  • Question
It’s silt / sludge ideally need to run the oil...
Replies
1
Views
250
O
  • Article
Are at home Level 2 courses actually viable...
Replies
0
Views
142
OLG0824
O
  • Article
Shower tray not flush to wall Hello All, I...
Replies
0
Views
119
  • Question
Grohe used to be great 50 years ago. In fact...
Replies
5
Views
565
N
  • Article
grade B ld1 conventional fire detection system...
Replies
0
Views
127
Nelly72
N
Back
Top