Bathroom radiators stopped working | Gaining Plumbing Experience | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Bathroom radiators stopped working in the Gaining Plumbing Experience area at Plumbers Forums

Y1D

Messages
8
Hi there

I’ve had to have a new heat exchanger and air valve installed into my boiler which is now working well. The only problem is since then neither of my 2 bathroom radiators come on. They both always used to come on when the hot water was on, as well as when the heating was on which was nice to have nice warm rooms in the morning.

I’ve tried to bleed both but water comes out straight away so it’s not air, and all the other radiators work fine.

Any ideas what the issue could be and can I resolve it or will I need the plumber back again?

Thanks.
 
do they warm up with the heating on?
 
Hi, thanks for the reply - no, they’re permanently cold.

did they used to come on with the rest of the heating?
 
could be air locked

turn the heating on

and if you have trvs on all / most of the other rads turn them off

should sort you out and once the rails become warm turn all the other rads back to normal / what they were set at

and then bleed the towel rails
 
could be air locked

turn the heating on

and if you have trvs on all / most of the other rads turn them off

should sort you out and once the rails become warm turn all the other rads back to normal / what they were set at

and then bleed the towel rails
Thanks will try that in morning as the lad has just gone to bed. Will report back - thanks
 
Still no joy. The plumber did say there was air in the system and it had no where to go.... Guess it went into the bathroom radiator pipes.

The feed pipes aren't even getting warm so I guess ill have to get someone else out to take a look.
 
Hot water wasn't on when you tried my fix was it ?
 
No. The pipes into the radiators aren’t even getting warm. I’ve removed some aif from another radiator and checked all, but as soon as I loosen the nut water comes out and no air.

What about turning all the trvs off did you do that ?
 
Not sure what that is.... I turned off all the other radiators by their thermostat if that’s what you mean?

Yea

Sounds like you might need him back after all
 

Similar plumbing topics

  • Question
Before doing this, check the level in the cold...
Replies
9
Views
917
1/4 turn black knob on both. open bleed screw...
Replies
7
Views
833
  • Question
Yep thats right. The other common block place...
Replies
3
Views
857
Pin hole leak on suction side of pump.
Replies
1
Views
467
  • Question
Cheers. No, I've not touched the lockshield...
Replies
3
Views
1K
Back
Top