BAXI 105E Error 60 light

[paul_cragg]

Hi, have changed the DHW diaphragm as wasn’t getting hot water to shower, the old one did have a tear. Now getting error 60 light every 5 or 6 times the boiler fires up. Could this have anything to do with the change I made?

many help much appreciated 😀

 

[Aquarius]

Have you checked the pressure? Did you isolate anything?

 

[paul_cragg]

Have you checked the pressure? Did you isolate anything?

Hi, yes, I turned mains off and ran the hot tap. The pressure is at 2 bar. I also cleaned and greased the pin. When watching the pin meet the microswitch all seems good. Wondered if switch is at fault, maybe getting stuck, is it possible to clean/grease them?

 

[Aquarius]

Not entirely sure as I’ve never done one. It might be that your pump is sticking.