Baxi 105e | Plumbing Jobs | The Job-board | Plumbers Forums

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

Discuss Baxi 105e in the Plumbing Jobs | The Job-board area at Plumbers Forums

Status
Not open for further replies.

shaky

Plumbers Arms member
Plumber
Gas Engineer
Messages
259
Any one had problem were the hot water is stuck on even though no taps are running. The green tap light symbol is on solid not flashing and boiler running so when you go to put heating on it won't come one because it's running in hot water mode.
 
At from of differential (diaphragm) is a microswitch. Disconnect one of the two wires and your hw should be off. Check if differential is stuck.
 
I've had them where the microswitch is stuck permanently on with the spindle still in.
 
Had a couple of these lately , spindle sticking, best thing is to replace Diff assembly £70.00 from sparesbase part No SO11814.
 
Cheers all,
the info was given by guy on the phone I'm going tomorrow morning to sort out ill come back with my findings.
 
Cheers all,
the info was given by guy on the phone I'm going tomorrow morning to sort out ill come back with my findings.

If above all fail check two pipes running from DCW to diaphanous are clear.
 
Status
Not open for further replies.

Similar plumbing topics

Chris, just to update, thanks for all your...
Replies
3
Views
791
faulty diaphram with the sound of it.
Replies
1
Views
778
(cont'd) Anyway, fairly keen for someone to...
Replies
2
Views
1K
Have you got a photo of the sink at the...
Replies
2
Views
625
Back
Top