Baxi 105he

[lolipop]

Customer is having problems with hot water temp ,the hot tap has got to be turned down really slow to 4 litres a min to get hot water temp up to 40 degs I ve got 12 mbar burner pressure the temp of the primary flow is 52 degs. I ve checked that the potentiometer is turned up ,both dhw and ch thermistors reading 4.4 kohms and 5.2 respectively there is no heat going down the flow or the return pipes ,the boiler runs constantly I am thinking its the pcb not controlling the sensors correctly anyone any ideas cheers

 

[diamondgas]

You know all the technical stuff lolipop .... Yet the conclusion is a strange one...??? Get yourself in the gas safe only area and your question will be answered ... http://www.ukplumbersforums.co.uk/gas-safe-registered-plumbers-only-private-gas-engineers-forum/

 

[lolipop]

What info do you need for gas safe area? Cheers diamond

 

[Dotty]

Please increase your post count to 10+ then send a pm to either Gas man or Redsaw who will then check you and then give you access to the gsr private forum.

Thank you.

Gas man - View Profile: gas man - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK

or Redsaw - View Profile: REDSAW - Plumbing Forum | Plumbing Advice | Plumbers Forums | A forum for plumbers advice in the UK

with your gsr details.

They'll test you then give you access to the private forum where these questions can be answered safely.

Cheers mate.

I'm locking this thread until you have access. When you do I'll move it to the gsr private forum and reopen it.