Baxi 600..............

[Scott_D]

Anyone fitting them? What are your thoughts?

 

[Harvest Fields]

Anyone fitting them? What are your thoughts?

Not fitted a Baxi in ages mate.
Sorry.

 

[ShaunCorbs]

There ok got some good points and bad

Medium boiler for me (the 600)

 

[Scott_D]

Got to quote for a mid range combi in a loft
Can't decide if I should try a 600 or stick to a logic

 

[ShaunCorbs]

try the 600 mate

 

[townfanjon]

I dont know why ,but a pal of mine who was Viessmann through and through has moved over to the 600 and loves them

 

[Harvest Fields]

I dont know why ,but a pal of mine who was Viessmann through and through has moved over to the 600 and loves them

I wouldn’t do either but if you have to look at the ecofit pure Vaillant ( It does have an alloy heat ex though)

 

[Scott_D]

I wouldn’t do either but if you have to look at the ecofit pure Vaillant ( It does have an alloy heat ex though)

May as well fit the logic or a glow worm

 

[Harvest Fields]

But they are not Vaillant’s

 

[sammathias]

Ecofit our is basically a glowworm.

 

[Scott_D]

What are the service intervals for opening up a pure or glowworm to wash out the hex?

 

[ShaunCorbs]

As it's an alu hex every year

 

[Harvest Fields]

As above mate

 

[Scott_D]

As above mate

Have you fitted many pures?

 

[Harvest Fields]

Have you fitted many pures?

Not really. Done 2 for landlords but I hate fitting Alloy Heat ex’s but my labour went up for the 2

 

[Scott_D]

They have chosen an ATAG
Quoted baxi 600 and ATAG

 

[Harvest Fields]

ATAG are my second option.

 

[Scott_D]

It's going in a loft, no need for a PRV as it combined
No need for a frost stat & pipe stat as the weather comp sensor protects it

 

[ShaunCorbs]

It's going in a loft, no need for a PRV as it combined
No need for a frost stat & pipe stat as the weather comp sensor protects it

cant run the condy in solvent weld needs to be pushfit

 

[Scott_D]

cant run the condy in solvent weld needs to be pushfit

I hadn't thought of that to be honest

It's a full heating system anyway so can do it all properly

 

[Scott_D]

cant run the condy in solvent weld needs to be pushfit

Was thinking about this today.
The condensate adapter on the boiler is to connect onto overflow pipe. This is always solvent weld and not high temp as far as I know?

 

[ShaunCorbs]

Was thinking about this today.
The condensate adapter on the boiler is to connect onto overflow pipe. This is always solvent weld and not high temp as far as I know?

Yea don't they come with the flexibile tube ?

 

[Scott_D]

Yes

 

[ShaunCorbs]

Yes

So straight into a washing machine trap and go from there