Baxi Bermuda 551 with strange hot water tank??? | Bathroom Advice | Plumbers Forums
  • Welcome to PlumbersTalk.net

    Welcome to Plumbers' Talk | The new domain for UKPF / Plumbers Forums. Login with your existing details they should all work fine. Please checkout the PT Updates Forum

Welcome to the forum. Although you can post in any forum, the USA forum is here in case of local regs or laws

American Visitor?

Hey friend, we're detecting that you're an American visitor and want to thank you for coming to PlumbersTalk.net - Here is a link to the American Plumbing Forum. Though if you post in any other forum from your computer / phone it'll be marked with a little american flag so that other users can help from your neck of the woods. We hope this helps. And thanks once again.

Discuss Baxi Bermuda 551 with strange hot water tank??? in the Bathroom Advice area at Plumbers Forums

c.gas

Plumbers Arms member
Plumber
Gas Engineer
Messages
165
Anyone shed any light on this system. Baxi Bermuda 551 which is apparently the first Bermuda made in 70's and there was only 1 tank upstairs which seems to have a built in header tank. In the main part of the tank had 2 cylinder tanks, 1 sticking out of the water and one at the bottom of the water which you can just about make out in the pictures. Couldn't find any pump or anything although it could be under the floor somewhere
 

Attachments

  • image.jpg
    image.jpg
    28.7 KB · Views: 41
Apparantly the issue was it was bubbling over, when I was there you could see all water marks down the bedroom wall, looked like someone had been using a wall paper stripper in the room and the marks had dried with a slightly brown tinge. I think it's split inside as water coming out of the overflow when heating is on and it's a new ball valve. Also thinking thermostat on boiler aswel as water shouldn't have got that hot
 

Similar plumbing topics

C
  • Question
Is there a ball valve on the flexihoses? Might...
Replies
1
Views
858
see same. below on this as some one has had...
Replies
1
Views
860
  • Question
If this is pumping over or expansion from the...
Replies
8
Views
1K
B
No the installers need to come out
Replies
10
Views
2K
  • Question
Yours is an old fotic cylinder, Thermal store...
Replies
1
Views
980
Back
Top